Tundra 4WD V8-5.7L (3UR-FE) (2007)
NOTE:
-
Do not touch the cone part of the speaker.
-
When installing the speaker to the instrument panel, be careful that the wires do not get caught between the parts.
3. INSTALL NO.2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
a. Attach the 4 clips and claw to install the speaker panel.
4. INSTALL NO.1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
a. Attach the 4 clips and claw to install the speaker panel.
5. INSTALL FRONT PILLAR GARNISH RH
6. INSTALL FRONT PILLAR GARNISH LH
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected.