toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

A/T - Torque Converter Shudders|Page 10612 > < A/T - Torque Converter Bolt Installation Precautions|Page 10607
Page 1
background image

Torque Converter: All Technical Service Bulletins
A/T - Torque Converter Shudders

TC018-07
REVISED

Title:
TORQUE CONVERTER SHUDDER

Models:
'07 - '08 Tundra (6 Speed ATM)

November 30, 2007

TSB REVISION NOTICE:

^

January 4, 2008: Production Change Information has been added.

Previous versions of this TSB should be discarded.

Introduction
Some customers may complain about an intermittent shudder when lightly accelerating after an upshift between 20 - 45 mph (32 - 72 km/h) or before a
downshift between 30 - 65 mph (48 - 104 km/h) when the torque converter assembly is in flex lockup. Production changes to the torque converter have
been implemented to improve this condition. Refer to the diagnostic instructions below to confirm if the torque converter needs to be replaced.

Applicable Vehicles

^

2007 - 2008 model year Tundra vehicles equipped with 6 speed automatic transmission (5.7 L V8 engine) and produced BEFORE the Production
Change Effective VINs shown below.

Production Change Information

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Powertrain Warranty. This warranty is in effect for 60 months or 60,000 miles, whichever occurs first, from the
vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

A/T - Torque Converter Shudders|Page 10612 > < A/T - Torque Converter Bolt Installation Precautions|Page 10607