Tundra 4WD V8-5.7L (3UR-FE) (2007)
36. REMOVE ASSIST GRIP PLUG
a. Insert a screwdriver into the service notch and break off the cap.
b. Detach the clip and remove the assist grip plug.
37. REMOVE COAT HOOK
HINT: Use the same procedure to remove the coat hook on the other side.
a. Using a screwdriver, detach the 2 claws and remove the coat hook cap.
HINT: Tape the screwdriver tip before use.
b. Detach the clip and remove the coat hook.
38. REMOVE ROOF HEADLINING ASSEMBLY
a. w/ EC Mirror:
1. Detach the 2 claws and remove the inner rear view mirror cover.