Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1996002.png)
2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)
a. Inspect the outer mirror switch.
1. Select "L" on the left/right adjustment switch.
2. Measure the resistance according to the value(s) in the table below.
If the result is not as specified, replace the outer mirror switch.
3. Select "R" on the left/right adjustment switch.
4. Measure the resistance according to the value(s) in the table below.
If the result is not as specified, replace the outer mirror switch,
