Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-2077004.png)
4.
Remove the RH tail gate lock link assembly from the tail gate handle assembly (orange snap).
5.
Remove both LH and RH tail gate lock control links (control rods) from the LH and RH tail gate lock assemblies.
6.
Remove the old control link snaps from the LH and RH tail gate lock assembly.
Installation Procedure
1.
Install the NEW control link snaps to the tail gate lock assemblies.
2. Install the NEW LH and RH tail gate lock control links (control rods).
