Tundra 4WD V8-5.7L (3UR-FE) (2007)
1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
(a)
Using a T25 "TORX" socket wrench, remove the screw and reservoir.
2. REMOVE MASTER CYLINDER RESERVOIR GROMMET
(a)
Remove the 2 grommets.
REASSEMBLY
1. INSTALL MASTER CYLINDER RESERVOIR GROMMET
(a)
Apply lithium soap base glycol grease to the 2 grommets and install them onto the master cylinder body.
2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
(a)
Install the master cylinder reservoir onto the master cylinder body.
(b) Using a T25 "TORX" socket wrench, install the screw.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)