Tundra 4WD V8-5.7L (3UR-FE) (2007)
31. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
32. REMOVE PARKING BRAKE SHOE LEVER RH
HINT: Use the same procedures described for the LH side.
33. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
(a)
Disconnect the No. 2 parking brake cable from the 2 clamps (labeled A).
(b) Remove the 5 bolts (labeled B) and disconnect the No. 2 parking brake cable from the intermediate lever (labeled C).
NOTICE: Do not bend and twist the parking brake cable.
(c)
Remove the bolt (labeled D) and clamp.
(d) Remove the bolt and No. 2 parking brake cable from the rear axle carrier.