Tundra 4WD V8-5.7L (3UR-FE) (2007)
26. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for 3700 mm [12 ft. 1.7 in.] Wheelbase Type)
(a)
Install the No. 1 cable support bracket with the 3 bolts (labeled A).
Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
(b) Install the No. 1 parking brake cable to the inside of the vehicle with the 2 bolts (labeled B).
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(c)
Connect the 2 clamps (labeled C) to the No. 1 parking brake cable.
(d) Install the 2 clamps with the 2 nuts (labeled D).
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(e)
Install the No. 1 parking brake cable and cable retainer with the bolt (labeled E).
Torque: 13 N*m (127 kgf*cm, 9 ft.*lbf)
(f)
Temporarily install the adjustment nut and lock nut (labeled F).
NOTICE: Do not bend and twist the parking brake cable.
HINT: The nuts will be tightened to a torque specification in the "ADJUST PARKING BRAKE PEDAL TRAVEL" procedure.