Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-619007.png)
3. CAULK LOCK PLATE
(a)
Lightly press SST against the lock plate in the order shown in the illustration. After repeating this a few times, fully caulk the lock plate by
squeezing the handle until stopped by the stopper bolt.
SST 09230-01010
NOTICE:
^ Do not press the protruding areas around the ports (1) and brackets (2).
^ Do not use SST to press the areas indicated by the circle marks in the illustration. Use pliers and be careful not to damage the core plates.
