Tundra 4WD V8-5.7L (3UR-FE) (2007)
2. REMOVE FRONT ENGINE MOUNTING INSULATOR RH
(a)
Remove the nut and mounting insulator.
3. REMOVE WATER DRAIN COCK SUB-ASSEMBLY
(a)
Remove the drain cock from the cylinder block LH side.
4. REMOVE FRONT ENGINE MOUNTING INSULATOR LH
(a)
Remove the nut and mounting insulator.
INSTALLATION
1. INSTALL FRONT ENGINE MOUNTING INSULATOR LH
(a)
Install the mounting insulator with the nut.
Torque: 72 N*m (734 kgf*cm, 53 ft.*lbf)