Tundra 4WD V8-5.7L (3UR-FE) (2007)
(c)
Install the pipe to the oil filter cap.
NOTICE: If the O-ring is removed with the drain plug, install the O-ring together with the pipe.
HINT: Use a container to catch the draining oil.
(d) Check that oil is drained from the oil filter. Then disconnect the pipe and remove the O-ring, as shown in the illustration.
(e)
Using SST, remove the oil filter cap.
SST 09228-06501
NOTICE: Do not remove the oil filter bracket clip.