Tundra 4WD V8-5.7L (3UR-FE) (2007)
Intake Manifold: Service and Repair
REMOVAL
1. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY
a. Remove the front wiper motor and link.
2. REMOVE COWL TOP OUTER PANEL SUBASSEMBLY
a. Disconnect the 2 washer hoses.
b. Remove the 7 bolts and outer panel.
3. REMOVE NO. 1 ENGINE UNDER COVER
4. DRAIN ENGINE COOLANT
5. REMOVE V-BANK COVER SUB-ASSEMBLY
6. REMOVE AIR CLEANER HOSE ASSEMBLY
7. DISCONNECT VENTILATION HOSE ASSEMBLY
a. Disconnect the ventilation hose from the ventilation pipe of the cylinder head cover LH and RH.
8. REMOVE INTAKE MANIFOLD