Tundra 4WD V8-5.7L (3UR-FE) (2007)
12. REMOVE WATER PUMP PULLEY
(a)
Using SST, hold the water pump pulley.
SST 09960-10010 (09962-01000, 09963-01000)
(b) Remove the 4 bolts and water pump pulley.
13. REMOVE WATER PUMP ASSEMBLY
(a)
Remove the 8 bolts, water pump and gasket.
INSTALLATION
1. INSTALL WATER PUMP ASSEMBLY
(a)
Install a new gasket and the water pump with the 8 bolts shown in the illustration.
Torque:
for bolt A 47 N*m (479 kgf*cm, 35 ft.*lbf)
for bolt B 23 N*m (235 kgf*cm, 17 ft.*lbf)
for bolt C 20 N*m (204 kgf*cm, 15 ft.*lbf)
2. INSTALL WATER PUMP PULLEY
(a)
Temporarily install the pulley with the 4 bolts.
(b) Using SST, hold the pulley and tighten the 4 bolts.
SST 09960-10010 (09962-01000, 09963-01000)
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
3. INSTALL WATER INLET HOUSING
(a)
Install a new gasket to the water pump.