Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1681002.png)
b. for Double Cab:
Remove the front door scuff plate.
2. REMOVE COWL SIDE TRIM BOARD LH
a. for Regular Cab:
Remove the cowl side trim board.
b. for Double Cab:
Remove the cowl side trim board.
3. REMOVE CENTER LOWER INSTRUMENT COVER
4. REMOVE INSTRUMENT SIDE PANEL LH
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
7. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY
8. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL
9. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY
10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Detach the 4 clips.
b. Disconnect the connector and remove the panel.
INSTALLATION
1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
