Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1681003.png)
a. Connect the connector.
b. Attach the 4 clips to install the panel.
2. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY
3. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL
4. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY
5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
7. INSTALL INSTRUMENT SIDE PANEL LH
8. INSTALL CENTER LOWER INSTRUMENT COVER
9. INSTALL COWL SIDE TRIM BOARD LH
a. for Regular Cab:
Install the cowl side trim board.
b. for Double Cab:
Install the cowl side trim board.
10. INSTALL FRONT DOOR SCUFF PLATE LH
a. for Regular Cab:
Install the front door scuff plate.
b. for Double Cab:
Install the front door scuff plate.
