Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1691012.png)
a. Install the front wiper motor and bracket.
6. CONNECT HEATER WATER INLET HOSE AND HEATER WATER OUTLET HOSE
a. Connect the 2 heater water hoses and attach the 2 clips.
7. CONNECT TUBE SUB-ASSEMBLY
a. Remove the attached vinyl tape from the tubes.
b. Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the suction tube and liquid tube.
Compressor oil: ND-OIL 8 or equivalent
