Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-2134002.png)
Front Door Courtesy Switch
FRONT DOOR COURTESY SWITCH
REMOVAL
HINT:
-
Use the same procedures for the RH and LH side.
-
The procedures listed below are for the LH side.
1. REMOVE FRONT DOOR COURTESY SWITCH
a. Remove the bolt.
b. Disconnect the connector and remove the courtesy switch.
INSTALLATION
HINT:
-
Use the same procedures for the RH and LH side.
-
The procedures listed below are for the LH side.
-
A bolt without a torque specification is shown in the standard bolt chart
1. INSTALL FRONT DOOR COURTESY SWITCH
a. Connect the connector.
b. Install the courtesy switch with the bolt.
