Tundra 4WD V8-5.7L (3UR-FE) (2007)
1. INSTALL LIGHT BULB
a. Install the bulb to the socket.
b. Insert the bulb/socket unit into the stop light.
c. Turn the bulb/socket unit in the direction indicated by the arrow to install it.
2. INSTALL HIGH MOUNTED STOP LIGHT LENS
HINT: Perform these procedures only when replacing the bulb.
a. Install the 3 bulbs.
b. Install a new gasket.
HINT: Only perform this procedure if the gasket was removed.
c. Install the lens with the 4 screws.