toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Engine - Drive Belt Noises On Initial Start Up|Page 1799 > < Engine - Accessory Drive Belt Noise|Page 1793
Page 1
background image

Drive Belt: Customer Interest
Engine - Drive Belt Noises On Initial Start Up

T-SB-0081-09 

March 4, 2009

3UR-FE Accessory Drive Belt Noise

Service Category
Engine/Hybrid System

Section
Engine Mechanical 

Market
USA

Applicability

Introduction

Some customers may experience an abnormal noise from the engine accessory drive belt area during an initial start. An improved accessory drive belt
has been developed to reduce this noise.

Use the procedure in this bulletin to address customer concerns.

Parts Information

Warranty Information

APPLICABLE WARRANTY

^ This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first,

from the vehicle's in-service date.

Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Repair Procedure

1. Remove the drive belt.

Refer to the Technical Information System (TIS), applicable model and model year Repair Manual:

^

2008 Sequoia, Engine/Hybrid System  Engine Mechanical "3UR-FE Engine Mechanical: Drive Belt: Removal"

 2007 / 2008 Tundra, Engine/Hybrid System  Engine Mechanical "3UR-FE Engine Mechanical: Drive Belt: Removal"

2. Replace the drive belt.

Engine - Drive Belt Noises On Initial Start Up|Page 1799 > < Engine - Accessory Drive Belt Noise|Page 1793