Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-452010.png)
^
AJ4 (20-pin white connector)
14.
Unplug connectors AJ2 (11-pin white connector) and AJ4 (20-pin white connector).
15.
Connect AJ2 (11 pin) and AJ4 (20 pin) into the female 11-pin and 20-pin connectors of the NEW sub-wire harness.
16.
Plug the male 11-pin and 20-pin connectors from the NEW sub-wire harness into the original locations where the 11-pin and 20-pin connectors
AJ2 and AJ4 were located.
