Tundra 4WD V8-5.7L (3UR-FE) (2007)
A. Remove the RH side scuff plate by detaching the 6 claws and 3 clips.
B. Remove the cowl side trim board RH.
1. Remove the clip.
2. Detach the 2 clips and remove the cowl side trim board.
A. Remove the RH side scuff plate by detaching the 6 claws and 3 clips.
B. Remove the cowl side trim board RH.
1. Remove the clip.
2. Detach the 2 clips and remove the cowl side trim board.