toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Emissions - MIL ON/Multiple Air Injection DTCs Set|Page 4390 > < Emissions - MIL ON/Multiple Air Injection DTCs Set|Page 4381
Page 1
background image

Air Injection Bypass Valve: Customer Interest
Emissions - MIL ON/Multiple Air Injection DTCs Set

T-SB-0329-08

Rev2

October 28, 2008

Air Injection Pump With Water Intrusion: MIL "ON" DTC P0418, P0419, and/or P244 #

Service Category
Engine/Hybrid System

Section
Engine Control

Market
USA

Applicability

TSB REVISION NOTICE

May 27, 2010 Rev2:

^

The Applicable Warranty coverage has been updated in the Warranty Information section. 

July 13, 2009 Rev1:

The entire content of this bulletin has been updated with the following changes:

^

DTCs P2440, P2441, P2442, P2443 have been added.

^

Diagnosis and inspection of the emission control valves has been added. Any previous printed versions of this service bulletin should be discarded.

Introduction

Some 2007 - 2008 model year Tundra and 2008 model year Sequoia vehicles may exhibit a MIL "ON" condition with Diagnostic Trouble Codes (DTCs)
P0418, P0419, P2440, P2441, P2442, P2443, P2445, and/or P2447. This concern may be caused by water intrusion into the air injection pump
assemblies. Use the following procedure to address this condition.

Parts Information

Production Change Information

Emissions - MIL ON/Multiple Air Injection DTCs Set|Page 4390 > < Emissions - MIL ON/Multiple Air Injection DTCs Set|Page 4381