Tundra 4WD V8-5.7L (3UR-FE) (2007)
a. Connect the No. 2 water by-pass hose to the water by-pass joint.
8. CONNECT NO. 1 WATER BY-PASS HOSE
a. Connect the No. 1 water by-pass hose to the water by-pass joint and water inlet housing.
9. INSTALL NO. 1 ENGINE COVER
NOTE: Make sure that the No. 1 engine cover is level with the top surface of the intake port of the cylinder head for 1 and 2.
HINT:
-
Align the No. 1 engine cover cutouts with the air tube.
-
Align the No. 1 engine cover with the air switching valve surface and cylinder head wall.
10. CONNECT FUEL TUBE CLAMP
a. Connect the fuel tube clamp to the bracket.