Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-927008.png)
11. INSTALL NO. 2 ENGINE COVER
NOTE: Make sure that the No. 2 engine cover is level with the top surface of the intake port if the cylinder head.
HINT:
-
Align the No. 2 engine cover cutout with the air tube.
-
Align the No. 2 engine cover with the front water bypass joint and cylinder head wall.
12. INSTALL INTAKE MANIFOLD
a. Install the intake manifold.
13. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY
a. Install the exhaust manifold.
