Tundra 4WD V8-5.7L (3UR-FE) (2007)
b. Remove the 2 bolts, 2 nuts and air pump.
6. REMOVE AIR PUMP INLET
a. Remove the 2 bolts and air pump inlet.
7. DISCONNECT NO. 1 AIR INJECTION SYSTEM HOSE
a. Disconnect the 2 hoses.
8. REMOVE AIR PUMP ASSEMBLY
a. Using a clip remover, detach the 2 clamps and remove the air pump from the bracket.
b. Disconnect the 6 air pump insulators.
INSTALLATION
1. INSTALL AIR PUMP ASSEMBLY