Tundra 4WD V8-5.7L (3UR-FE) (2007)
a. Connect the 6 air pump insulators to the air pump and install the air pump to the bracket.
b. Attach the 2 wire harness clamps to the bracket.
2. CONNECT NO. 1 AIR INJECTION SYSTEM HOSE
a. Connect the 2 hoses to the air pump.
HINT: Insert the hoses until the hose ends are aligned with the stoppers.
3. INSTALL AIR PUMP INLET
a. Connect the air pump inlet to the 2 No. 1 air injection system hoses.
HINT: Insert the inlet until the inlet stoppers are aligned with the hose ends.
b. Install the 2 bolts.