Tundra 4WD V8-5.7L (3UR-FE) (2007)
1. Push the hose into the port and push the retainer to lock it.
NOTE:
-
Check for damage or foreign objects on the connected part.
-
After connecting, check that the vent hose and the valve are securely connected by pulling on them.
d. Connect the air inlet line hose.
NOTE:
-
Check for damage or foreign objects on the connected part.
-
After connecting, check that the vent hose and the valve are securely connected by pulling on them.
e. Connect the purge line hose.
f.
Connect the connector.
g. Connect the wire harness clamp bracket with the nut.
Torque: 10 N.m (102 kgf. cm, 7 ft.lbf)