Tundra 4WD V8-5.7L (3UR-FE) (2007)
Air Flow Meter/Sensor: Service and Repair
REMOVAL
1. REMOVE MASS AIR FLOW METER
a. Disconnect the MAF connector.
b. Remove the 2 screws and MAF meter.
INSTALLATION
1. INSTALL MASS AIR FLOW METER
a. Install the MAF meter with the 2 screws.
Torque: 1.7 N.m (17 kgf.cm, 15 in.lbf)
b. Connect the MAF connector.