Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-691001.png)
Knock Sensor: Service and Repair
REMOVAL
1. REMOVE INTAKE MANIFOLD
a. Remove the intake manifold.
2. REMOVE NO. 2 CYLINDER HEAD COVER
3. REMOVE NO. 1 ENGINE COVER
4. REMOVE SEPARATOR CASE
a. Remove the 4 bolts and separator case.
5. REMOVE KNOCK SENSOR
a. Disconnect the 4 knock sensor connectors.
b. Remove the 4 bolts and 4 knock sensors.
INSTALLATION
