Tundra 4WD V8-5.7L (3UR-FE) (2007)
b. Install the seat belt anchor with the bolt.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
c. Attach the 2 claws to install the lap belt outer anchor cover.
4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
6. INSTALL FRONT DOOR SCUFF PLATE
7. INSTALL REAR DOOR SCUFF PLATE
8. INSTALL FRONT SEAT ASSEMBLY
a. for Manual Seat: Install the front seat.
b. for Power Seat: Install the front seat.
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected.
Front Seat Outer Belt Assembly (For Regular Cab)