Tundra 4WD V8-5.7L (3UR-FE) (2007)
4. REMOVE CENTER REAR SEAT OUTER BELT ASSEMBLY
a. Remove the 4 bolts and outer belt.
5. REMOVE SEAT BELT BRACKET
a. Remove the 2 bolts and bracket.
INSTALLATION
1. INSTALL SEAT BELT BRACKET
a. Install the bracket with the 2 bolts.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
2. INSTALL CENTER REAR SEAT OUTER BELT ASSEMBLY
a. Align the vehicle's claws with the seat belt retractor positioning holes.
b. Install the retractor with the 2 bolts. First install the upper bolt, and then install the lower bolt.