Tundra 4WD V8-5.7L (3UR-FE) (2007)
1. INSTALL SEAT HEATER SWITCH RH
a. Attach the 2 claws to install the seat heater switch.
2. INSTALL SEAT HEATER SWITCH LH
a. Attach the 2 claws to install the seat heater switch.
3. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Connect the integration control and panel connectors.
b. Attach the 4 clips to install the panel.
4. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY
5. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL
6. INSTALL ASH RECEPTACLE LIGHT BULB
7. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
9. INSTALL INSTRUMENT SIDE PANEL LH
10. INSTALL COWL SIDE TRIM BOARD LH
a. for Double Cab:
Install the cowl side trim board.
b. for Regular Cab:
Install the cowl side trim board.
11. INSTALL FRONT DOOR SCUFF PLATE LH
a. for Double Cab:
Install the front door scuff plate.
b. for Regular Cab:
Install the front door scuff plate.