Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-132001.png)
Seat Heater Switch: Testing and Inspection
Seat Heater Switch (For Column Shift Type)
INSPECTION
1. INSPECT SEAT HEATER SWITCH LH
a. Measure the resistance according to the value(s) in the table below.
HINT: As the dial is being turned, the resistance changes gradually.
If the result is not as specified, replace the switch.
b. Check that the seat heater switch illuminates.
If the result is not as specified, replace the switch.
2. INSPECT SEAT HEATER SWITCH RH
