Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-161002.png)
a. Remove the hexagon socket head cap bolt (labeled A) and speed sensor (labeled B) from the knuckle.
5. REMOVE FRONT SKID CONTROL SENSOR CLAMP LH
a. Remove the bolt (labeled C) and skid control sensor clamp (labeled D) from the knuckle.
6. REMOVE FRONT SKID CONTROL SENSOR WIRE RH
a. Disconnect the connector (labeled A) from the front speed sensor.
b. Detach the 3 clips (labeled B) and remove the clamp bolt (labeled C).
