Tundra 4WD V8-5.7L (3UR-FE) (2007)
d. Remove the evaporator from the blower case (front side).
17. REMOVE EVAPORATOR TEMPERATURE SENSOR
a. Remove the sensor.
REASSEMBLY
1. INSTALL EVAPORATOR TEMPERATURE SENSOR
NOTE: If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted.
a. Install the sensor to a location that is 1 fin to the right or left of its previous location.
2. INSTALL NO.1 COOLER EVAPORATOR SUB-ASSEMBLY