Tundra 4WD V8-5.7L (3UR-FE) (2007)
Impact Sensor: Service and Repair
Center Airbag Sensor Assembly (For Column Shift Type)
Center Airbag Sensor Assembly (for Column Shift Type)
CENTER AIRBAG SENSOR ASSEMBLY (for Column Shift Type)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTE:
-
After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and
settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-)
battery terminal.
-
Some systems need to be initialized after the cable is reconnected.
2. REMOVE CENTER LOWER INSTRUMENT COVER
3. REMOVE CENTER AIRBAG SENSOR ASSEMBLY
a. Disconnect the holder (with connectors).