Tundra 4WD V8-5.7L (3UR-FE) (2007)
Vehicle Interior - Interior Panels/Trim - "Instrument Panel: Instrument Panel Safety Pad (for Column Shift Type) / (for Floor Shift Type):
Removal"
2008 Tundra:
Vehicle Interior - Interior Panels/Trim - "Instrument Panel: Instrument Panel Safety Pad (for Column Shift Type) / (for Floor Shift Type):
Removal"
B. Body ECU (for easier access)
C. Air Cleaner Case
2007 Tundra:
Engine/Hybrid System - Intake/Exhaust - "3UR-FE / 2UZ-FE / 1GR-FE Intake: Air Cleaner: Removal".
2008 Tundra:
Engine/Hybrid System - Intake/Exhaust - "3UR-FE / 2UZ-FE / 1GR-FE Intake: Intake Manifold: Removal"
D. Hood to Cowl Seal (for access to wiper motor connector)
2007 or 2008 Tundra:
Vehicle Exterior - Wiper/Washer - "Wiper and Washer: Front Wiper Motor: Removal"
E. Headlight Assemblies
2007 or 2008 Tundra:
Vehicle Exterior - Lighting (ext) - "Lighting: Headlight Assembly: Removal"
F. Windshield Washer Jar Assembly
2007 or 2008 Tundra:
Vehicle Exterior - Wiper/Washer - "Wiper and Washer: Washer Motor: Removal"
G. Hood Latch Assembly
2007 or 2008 Tundra:
Vehicle Exterior - Door/Hatch - "Engine Hood / Door: Hood Lock Control Cable Assembly: Removal"
H. Detach Radiator
2007 Tundra:
Engine/Hybrid System - Cooling - "3UR-FE / 2UZ-FE / 1GR-FE Cooling: Radiator: Removal"
2008 Tundra:
Engine/Hybrid System - Cooling - "3UR-FE / 2UZ-FE / 1GR-FE Cooling: Radiator: Removal"
I.
Detach ABS Actuator
2007 or 2008 Tundra:
Brake - Brake Control/Dynamic Control System - "Brake Control: Brake Actuator: Removal"
3. Replace the engine room main wire harness.
4. Reassemble in reverse order of disassembly.
5. Reconnect the negative (-) battery terminal.