Tundra 4WD V8-5.7L (3UR-FE) (2007)
3. INSPECT BRUSH
a. Using a vernier caliper, measure the brush length.
Standard length: 15.0 mm (0.591 in.)
Minimum length: 10.0 mm (0.394 in.)
If the brush length is less than the minimum, replace the brush holder and yoke assembly.
4. INSPECT STARTER BRUSH HOLDER ASSEMBLY
a. Inspect the insulation.
1. Measure the resistance according to the value(s) in the table.
If the result is not as specified, replace the brush holder assembly.