Tundra 4WD V8-5.7L (3UR-FE) (2007)
8. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a)
Disconnect the 2 ECU connectors.
(b) Remove the 2 screws and ECU.
INSTALLATION
1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU
(a)
Install the ECU with the 2 screws.
Torque: 1.5 Nm (15 kgf-cm, 13 inch lbs.)
(b) Connect the 2 ECU connectors.
2. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY
3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT
4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
5. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
6. INSTALL LOWER STEERING COLUMN COVER
(a)
Attach the 2 claws to install the steering column lower cover.
7. INSTALL UPPER STEERING COLUMN COVER