Tundra 4WD V8-5.7L (3UR-FE) (2007)
NOTICE: Take care not to drop the vane plate.
(b) Remove the vane pump rotor.
7. REMOVE VANE PUMP CAM RING
(a)
Remove the cam ring from the front housing.
8. REMOVE VANE PUMP FRONT SIDE PLATE
(a)
Remove the front side plate from the front housing.
(b) Using a screwdriver, remove the O-ring from the front side plate.
HINT: Tape the screwdriver tip before use.
(c)
Remove the O-ring from the front housing.