Tundra 4WD V8-5.7L (3UR-FE) (2007)
(b) Install the suction port union to the vane pump with the bolt.
Torque: 12 Nm (122 kgf-cm, 9 ft. lbs.)
INSTALLATION
1. INSTALL VANE PUMP ASSEMBLY
(a)
Install the vane pump with the 2 bolts.
Torque: 28 Nm (286 kgf-cm, 21 ft. lbs.)
2. CONNECT PRESSURE FEED TUBE
(a)
Install a new gasket to the pressure feed tube.
(b) Install the pressure feed tube with the union bolt.
Torque: 51 Nm (520 kgf-cm, 38 ft. lbs.)
3. CONNECT POWER STEERING OIL PRESSURE SENSOR CONNECTOR