Tundra 4WD V8-5.7L (3UR-FE) (2007)
2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE FRONT WHEELS
4. REMOVE NO. 1 ENGINE UNDER COVER
5. SEPARATE NO. 2 INTERMEDIATE SHAFT ASSEMBLY
6. DISCONNECT TIE ROD END SUB-ASSEMBLY LH
(a)
Remove the cotter pin and nut.
(b) Using SST, disconnect the tie rod end LH from the steering knuckle.
SST 09628-00011
NOTICE:
^
Hang SST with a string, etc. to prevent it from falling.
^
Do not damage the front disc brake dust cover.
^
Do not damage the ball joint dust cover.
^
Do not damage the steering knuckle.
7. DISCONNECT TIE ROD END SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
8. DISCONNECT PRESSURE FEED TUBE ASSEMBLY
(a)
Using SST, disconnect the pressure feed tube (return tube side) from the power steering gear.
SST 09023-12701