Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1613003.png)
(a)
Remove the bolt and disconnect the brake tube bracket from the steering knuckle.
(b) Remove the 2 bolts and disconnect the disc brake caliper from the steering knuckle.
NOTICE:
^ Do not disconnect the flexible hose from the disc brake caliper.
^ Do not twist or bend the flexible hose.
3. REMOVE FRONT DISC LH
4. REMOVE FRONT AXLE HUB GREASE CAP LH (for 4WD)
(a)
Using a screwdriver and hammer, remove the axle hub grease cap.
NOTICE: Do not damage the axle hub.
5. REMOVE FRONT AXLE HUB NUT LH (for 4WD)
(a)
Remove the cotter pin, adjusting lock cap and front axle hub nut.
