Tundra 4WD V8-5.7L (3UR-FE) (2007)
2.
Disconnect the front disc brake caliper assembly LH.
A.
Remove the bolt and disconnect the brake tube bracket from the steering knuckle.
B.
Remove the 2 bolts and disconnect the disc brake caliper from the steering knuckle.
NOTICE:
^
Do NOT disconnect the flexible hose from the disc brake caliper.
^
Do NOT twist or bend the flexible hose.
3.
Remove the front disc LH.
4.
Remove the front axle hub grease cap LH using a screwdriver and hammer.
NOTICE:
Do NOT damage the axle hub.