Tundra 4WD V8-5.7L (3UR-FE) (2007)
SST: 09520-10021; 09520-01010
NOTE
The side gear intermediate shaft sub-assembly is secured into the differential with a C-ring similar to an axle shaft.
3. Remove the axle shaft oil seal.
Using the SST, tap out the oil seal as shown in Figure 5.
SST: 09308-00010
NOTE
If SST 09308-00010 is not available, separate the differential housing and tap the seal out from the inside.
4. Separate the differential housing.
A. Remove the bolts B (3) and differential support bracket.
B. Remove the bolts A (11).
C. Using a plastic-faced hammer separate the differential housing.