Tundra 4WD V8-5.7L (3UR-FE) (2007)
B. Apply seal packing to the differential housing contact surfaces as shown.
Adhesive:
Toyota Genuine Adhesive 1281, Three Bond 1281, or equivalent
Install the other half of the differential housing within 10 minutes of applying seal packing.
C. Reinstall the differential bearing retainer
housing with 11 bolts A and 3 bolts B.
Bolt A:
Torque: 65 N*m (633 kgf*cm, 48 ft*lbf)
Bolt B:
Torque: 155 N*m (1581 kgf*cm, 114 ft*lbf)
14. Install the differential side gear intermediate shaft sub-assembly.