Tundra 4WD V8-5.7L (3UR-FE) (2007)
1.
Install the propeller with center bearing shaft assembly (for 3-joint type).
A.
Remove the SST from the transmission.
^
SST P/N 09325-40010 (A750E)
^
SST P/N 09325-60010
(or equivalent) (AB60E)
B.
Insert the sleeve yoke into the transmission.
C.
W/O Bearing Washer:
Temporarily install the center support bearing to the crossmember with the 2 mounting bolts.
W/ Bearing Washer:
Temporarily install the center support bearing to the crossmember with the 2 bearing washers and 2 mounting bolts.