toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drivetrain - Front Driveshaft Ticking Noise In 4WD|Page 6140 > < Driveshaft - Revised Center Bearing Adjustment Procedure|Page 6131
Page 1
background image

Drive/Propeller Shaft: Customer Interest
Drivetrain - Front Driveshaft Ticking Noise In 4WD

T-SB-0045-10

January 27, 2010

Front Propeller Shaft Parts Label Delaminating - Ticking Noise

Service Category
Drivetrain

Section
Drive Shaft/Propeller Shaft

Market
USA

Applicability

Introduction

Some 2008 - 2010 model year 4WD Sequoia and 2007 - 2010 model year 4WD Tundra vehicles may have a ticking noise present only when in 4WD.
Production changes have been made to correct this condition. Follow the procedure in this bulletin to address this condition.

Warranty Information

APPLICABLE WARRANTY

^

This repair is covered under the Toyota Powertrain Warranty. This warranty is in effect for 60 months or 60,000 miles, whichever occurs first, from
the vehicle's in-service date.

^

Warranty application is limited to occurrence of the specified condition described in this bulletin.

Repair Procedure

1. Confirm there is a ticking noise only present in 4WD.

Drivetrain - Front Driveshaft Ticking Noise In 4WD|Page 6140 > < Driveshaft - Revised Center Bearing Adjustment Procedure|Page 6131