toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Recalls:|SSC70G > < Drivetrain - Driveshaft Clunk or Thunk Noise|Page 6146
Page 1
background image

Drive/Propeller Shaft: Recalls
Recall 07V579000: Drive Shaft Inspection/Replacement

MAKE/MODELS:           MODEL/BUILD YEARS:      
     
Toyota/Tundra            2007
 
MANUFACTURER: Toyota Motor North America, Inc.   
 
NHTSA CAMPAIGN ID NUMBER: 07V579000  

MFR'S REPORT DATE: December 14, 2007 

COMPONENT: Power Train: Driveline: Driveshaft 

POTENTIAL NUMBER OF UNITS AFFECTED: 15616 

SUMMARY: 
 On certain 4-wheel drive pickup trucks, due to the improper heat treatment of the slip yokes that had been reworked during the manufacturing process,
the hardness of the slip yoke may be insufficient. 

CONSEQUENCE: 
 In this condition, there is a possibility that the yoke may break causing the propeller shaft to separate at the joint and come into contact with the road
surface or the fuel tank which could result in a loss of vehicle control or a fuel leak. 

REMEDY: 
 Dealers will inspect the slip yoke and replace the propeller shaft if necessary free of charge. The recall is expected to begin during January 2008.
Owners may contact Toyota at 1-800-331-4331. 

NOTES: 
 Toyota recall No. 70G. Customers may also contact The National Highway Traffic Safety Administration's Vehicle Safety Hotline at 1-888-327-4236
(TTY 1-800-424-9153), or go to http://www.safercar.gov.

Recalls:|SSC70G > < Drivetrain - Driveshaft Clunk or Thunk Noise|Page 6146