Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1197003.png)
2. Install ChaSSiSEAR(TM) on the vehicle and attempt to isolate the source of the noise. Is the noise loudest near the rear wheel bearing assembly?
^
YES - Go to step 3.
^
NO - This TSB does NOT apply. Continue diagnosis to isolate the source of the noise.
3. Replace the rear wheel bearing caliper bracket and related parts.
Refer to the Technical Information System (TIS) applicable model year Repair Manual:
4. Test drive the vehicle and confirm the noise is eliminated.
5. Re-check rear differential oil level and confirm NO leaks are present.
